Primacoustic FullTrap Broadband Bass Trap
Primacoustic FullTrap Mounted on WallPrimacoustic FullTrap Color OptionsPrimacoustic FullTrap DimensionsPrimacoustic FullTrap Exploded View Showing Construction

Primacoustic FullTrap Wall Mount Bass Trap


The Primacoustic FullTrap is a high performance broadband bass trap. If for whatever reason you can't mount a MaxTrap in the corner of your room, the FullTrap is perfect alternative. The 24″ x 48″ device is a combination full range absorber and diaphragmatic resonator designed to control all frequencies right down to the deepest bass.

This is achieved by combining a full-size high density glass wool panel with a closed air space behind created by the wood frame to absorb sound below 100Hz. Lower frequencies pass through the front face and then cause the internal diaphragm to resonate. The greater energy contained in low frequencies causes the limp-mass diaphragm to naturally migrate to the frequencies where room resonance is most prominent, thereby reducing the effect of room modes.

With FullTraps mounted in your room, you will immediately hear a tighter, more accurate bass response and an overall increase in clarity.

The FullTrap is shipped flat in kit form to save on freight costs, and features an easy-to-assemble (and easy to clean) black melamine coated wood composite frame. Assembly and installation will typically take less than 30 minutes per unit. The Primacoustic FullTrap can be ordered in your choice of black, grey or beige panel fabric to suit most color schemes.

Clear selection
SKU: PRIMA-FULL. Category: . Tag: .

Additional Information


48″ x 24″ x 8″


Black melamine laminated MDF frame, 3″ thick 6 lb/cu ft (pcf) compressed fiberglass panel, mass loaded vinyl limp membrane


One (1) bass trap




There are no reviews yet.

Be the first to review “Primacoustic FullTrap Wall Mount Bass Trap”