Simply twist Cloud Anchors into the back of any 2-inch or 3-inch Broadway panel for a strong and secure installation. The integrated eye screw allows overhead suspension by tie wire or chain.

The post Primacoustic Cloud Anchor – 12 Twist-In Anchors for Hanging Acoustic Clouds appeared first on Arqen Acoustics Store.

The panel is held in place using a series of sharp protruding darts that penetrate the panel to secure it during installation.  To ensure panels do not get dislodged after installation, applying a dab of construction adhesive to the impaler darts during the mounting process adds a level of security and reduces opportunity for tampering.  Impalers are installed using typical sheetrock anchors and screws and therefore, will not cause serious surface defacement to the wall.

The post Primacoustic Offset Impaler – 8 Off-Set Mount Clips for Broadway Panels appeared first on Arqen Acoustics Store.

The panel is held in place using a series of sharp protruding darts that penetrate the panel to secure it during installation.  To ensure panels do not get dislodged after installation, a dab of construction adhesive may be applied to the impaler darts during the mounting process adding a higher level of security and reducing opportunity for tampering.  Impalers are installed using typical sheetrock anchors and screws.

The post Primacoustic Corner Impaler – 8 Mount Clips for Broadway Panels appeared first on Arqen Acoustics Store.

• Protruding spinal darts for direct push-on installation
• Lets you snug panels together end-to-end
• Minimal wall defacement only requires filling a hole

Primacoustic's Push-On Impaler has been developed to increase the speed of installation for commercial contractors.  This employs a series of sharp, protruding darts that allow the acoustic panel to be precisely positioned on the wall without having to fret about a hanging offset.  The design also allows panels to be butted up end-to-end for seamless installations where larger acoustic surfaces need to be created.

Shipped 24 to a box, the Push-On Impaler is made from a heavy galvanized steel plate and is equipped with elongated mounting slots for stud mounting.  Installation is equally easy in plaster board, sheetrock or masonry using the triple-action Cobra Anchors.

For more security in high traffic zones, the Push-On Impaler is equipped with a glue zone at the center of the panel.  This allows you to add a dab of adhesive to firmly hold the panel in place.  This is also a good idea when installing Broadway panels in public places such as schools.  Since the adhesive only makes contact with the Impaler and the panel, you do not suffer the problem associated with foam panels that causes wall defacement due to the glue residue.

The post Primacoustic Push-On Impalers – 24 Mount Clips for Broadway Panels appeared first on Arqen Acoustics Store.

Primacoustic surface mount impalers are designed to provide the installer with a simple and effective method of mounting Broadway fiberglass acoustic panels onto walls without causing serious surface defacement. The surface mount impaler features a series of sharp protruding darts that penetrate the panel to secure it in place during installation. To ensure panels do not get dislodged after installation, applying a dab of construction adhesive to the impaler darts during the mounting process adds a level of security and reduces opportunity for tampering. Impalers are installed using typical sheetrock anchors and screws.

The post Primacoustic Surface Impaler – 24 Mount Clips for Broadway Panels appeared first on Arqen Acoustics Store.

When a Stacker Base is combined with Stacker Levels, you can safely stack multiple Super Bass Extreme traps in the corner, without the need to permanently fix them to the walls.

Use a Vicoustic Stacker Base below the bottom bass trap, giving a stable platform for building your bass trap stack. Use Stacker Levels (sold separately) between each pair of traps for convenient, structurally sound stacking.

This modular, non-glue installation system gives you flexible mounting options and mobility. Super Bass Extreme Stackers make it fast and easy to mount your traps and move them around as you please.

Available in five elegant wood finishes: cherry, light brown, nordik, wenge and white.

Usually ships in 5-10 business days. Ships from the USA. Prices are in US dollars.

For a complete room solution, click here for your custom Vicoustic room treatment plan.

The post Vicoustic Super Bass Extreme Stacker Base appeared first on Arqen Acoustics Store.

When Stacker Levels are combined with a Stacker Base, you can safely stack multiple Super Bass Extreme traps in the corner, without the need to permanently fix them to your walls.

Use a Vicoustic Stacker Base (sold separately) below the bottom bass trap, giving a stable platform for building your bass trap stack. Then, use a Stacker Level between each pair of traps for convenient, structurally sound stacking.

This modular, non-glue installation system gives you flexible mounting options and mobility. Super Bass Extreme Stackers make it fast and easy to mount your traps and move them around as you please.

Available in five elegant finishes: cherry, light brown, nordik, wenge and white.

Usually ships in 5-10 business days. Ships from the USA. Prices are in US dollars.

For a complete room solution, click here for your custom Vicoustic room treatment plan.

The post Vicoustic Super Bass Extreme Stacker Level appeared first on Arqen Acoustics Store.